WOC Inline Electrical Connector Without Cable

The WOC connectors come with easily accessible solder pots and an o-ringed, pull-over potting collar. After soldering your cable to the connector, the collar is snapped into position. The collar is then back filled with a two-part urethane rubber compound, resulting in a watertight seal. The "WOC" series mate with the standard lines of RMG subsea connectors.



*When ordering “WOC” (without cable) 2 part rubber molded connectors use the above numbers then add “WOC” to the part number (e.g. RMG-2-FS-WOC).