New and Used Oceanographic and Environmental Equipment Clearance

 

Horizon H300 300 Watt Fuel Cell System - Used

Includes:

  • Zahn DC-DC Converter
  • All appropriate hoses, wiring and meters
  • Solar charge controller for electronics control batteries

This system does not include a hydrogen storage tank.

Originally used for the first fuel cell sailboat prototype.

Asking Price: $2500.00 CDN

Airborne Towed Instrumentation System - Two used towed birds with accessories

Custom designed for NORANDA/Falconbridge in 1982, these are conductive graphite coated fibreglass aerodynamic tow birds with lead shot weighted noses. They are specifically designed to carry magnetometers and VLF sensors for towing behind helicopters in low-level flight.

The units were originally designed to take a Barringer 123 base station magnetometer system with an airborne recorder station, but a more modern system could be retrofitted. They were also designed to mount an airborne VLF system.

Asking price: $3000.00 CDN for two birds

This price included the moulds to make spare parts, a cart for moving them around plus some mixed VLF sensor system components. The whole package fits on a 4’ x 6’ pallet and could be shipped by air or truck.

 

Used and Old Stock Subsea Lights

These lights are either lightly used for testing and development or are old stock superceded by new designs. The list of available lights includes:

2 x ZIP Light 2000 (25W Halogen, 2.875" diameter anodized aluminum housing)

1 x ZIP Light LED (40W Atlas LED ~1040 Lumens output, anodized aluminum housing)

1 x S2000E Version 1 (Elara LED Module)

4 x S2000E Version 2 (Atlas LED Module, 260+ lumens each)

These lights do not come with pigtail connectors (RMG-2-FS required).

Asking price: $300 Each

50cm Pigtail connector: $47.60 Each (New Stock)

Reconditioned FOCAL Model 180 Two-Conductor Slip Ring (Manufactured for Klein Associates Inc.)

Model Number: 14102696

Input Connector: 2-pin
Output Connector (replaced during reconditioning): SUBCONN 4-pin

Includes slip ring guard and adaptors suitable for mounting to winches or other stationary structures.

This slip ring is reconditioned; the output subsea connector had developed internal faults and was replaced by a SUBCONN Circular Bulkhead (four-pin) wired to duplex the pins. The internal brushes and contacts were inspected and found to be in excellent condition.

Asking Price: $1200

 

Home