HPD
Depth / Pressure Sensor
(Optional
temperature measurement available)
The
A.G.O. HPD is an economical solution for providing depth (and optionally temperature)
data.
The HPD reports depth sensor
data as standard NMEA compatible sentences at 1 second intervals. An example
NMEA depth sensor output sentence for a 15.2 bar pressure reading is: $YYXDR,P,15.2,B,D*A5
Features:
- 0-20 Bar pressure sensor
range
- +/- 1% sensor accuracy
over -20C to + 85C
- One second reporting
interval
- Low power - Runs from
any 12-24 VDC power source that can supply 50 mA
- 1.5 inch diameter stainless
steel pressure case
- Data output at NMEA compatible
4800 Baud rate.
- RS232 driver standard
- Typical maximum cable
length 100 m (depends on actual cable capacitance)
- Connector: LSG-6-BCL
Options:
- -20 to + 50C temperature
output
- RS485 Driver optional
for long cable runs
- 1000 m or more possible
with a properly terminated low capacitance cable
- Higher baud rates available